A matt water-based wall paint you can use to create a tough concrete look. Ideal for industrial interior styles.
What's in it for you
- Needs one thick layer
- Eliminates small imperfections
- You create an unique beton effect
- Easy to apply
- Painting materials can be cleaned with water
Levis Ambaince Beton Effect - Concrete look paint
Extra matte, water-based product for a unique concrete look.
Description
The Levis Ambiance Concrete effect is an extra matt, water-based product that allows you to create a unique concrete look on your walls. The paint is also ideal for smoothing out unevenness and minor damage/hairline cracks in the surface (smaller than 2 mm).
To get the full effect of the paint, it's recommended to apply it with the Levis Ambiance Beton Effect Roller & Strijker.
Key features
- Long-lasting colour retention
- Very high coverage
- Extra matt effect
- Excellent washability
- Easy to apply
- Scratch and impact resistant.
- Not suitable for outdoor and wet areas.
- Excellent colour retention due to the addition of a special additive.
- Very high coverage, covers in one coat.
Application method: | Paint roller |
---|---|
Coverage: | 5-8 m²/l |
Gloss level: | Extra matt |
Opacity: | Opaque |
Purpose: | Ceiling, Walls |
Base: | Water-based |
Interior / exterior: | Interior |
Substrate: | Brick, Concrete, Fibreglass, Plasterboard, Stucco |
Area: | Bedroom, Child's room, Hallway, Living room |
Characteristics: | 1-component, Excellent cleanability, Scratch and wear resistant |
Product type: | Topcoat |
How to apply Levis Ambiance Beton Effect?
Preparation: As with any paint job, cover everything that does not need to be painted and make sure you prepare the surface properly first. The advantage to this product is that small cracks and unevennesses will work themselves out when you paint over them with Levis Ambiance Beton Effect. Larger cracks do need to be filled with a filler.
If your wall has a good intact paint layer, you do not need to buy extra primer. If the surface has never been painted before, apply 1 coat of Levis Primer Mur & Plafond.
Application: To apply this paint, you will need a special roller and spatula.
Using the roller, first apply a thick layer of the Ambiance Beton Effect. After waiting about five minutes, criss-cross through it with the iron in random directions. When ironing, you don't have to apply much pressure to get a beautiful result. Note: always work in areas of about 2 to 4m², as you only have twenty to thirty minutes to smooth the paint. After half an hour, the paint is really too dry to achieve the desired effect.
Done! Or not, because clearing up has to be done too. The roller is one to be reused so it needs to be cleaned thoroughly. Fortunately, you can use just water for this instead of white spirit.