€249.95
Water-based PU-impregnating oil for parquet and wooden furniture.
What's in it for you
- Ultimate invisible finish.
- Gives the wood a slightly intense appearance.
- Very easy to apply.
- Does not yellow.
Ciranova OCULTO plus - PU-impregnating oil
Description
OCULTO PLUS is an invisible, 35% Bio-based, environmentally friendly, water-based PU-impregnating oil for parquet and wooden furniture. The wood will have a slightly intense and ultra-matte appearance. OCULTO PLUS is non-yellowing and has anti-slip properties.
Key features
- Ultimate invisible finish
- Slightly intense appearance
- Very easy to apply
- Non-yellowing
Ordered before 4 pm, shipped the same working day
Which shipping methods can you choose from?
- Service Point Delivery (Benelux only): An environmentally friendly choice if you pick up your package(s) by bike or walking, or simply handy when you can't be at home.
✅ free for orders above € 75; otherwise € 4,95 - Home Delivery: have your products delivered at home or at any address you choose, by Bpost/DHL.
✅ free for orders above € 150; otherwise € 12,45
Can I return this product?
Application method: | Paint brush, Paint roller |
---|---|
Coverage: | 12 m²/l |
Gloss level: | Extra matt |
Opacity: | Transparent |
Purpose: | Furniture, Parquet |
Base: | Water-based |
Interior / exterior: | Interior |
Substrate: | Wood |
Area: | Bathroom, Bedroom, Child's room, Hallway, Kitchen, Living room |
Characteristics: | 1-component, Anti-slip, Eco-friendly |
Product type: | Oil |
How to use Ciranova Oculto Plus?
Preparation: Ensure that all old finishes have been completely removed and that the floor is free of dust and other contaminants. Can be used on sanded, planed and brushed wood.
Application: Apply the product by roller or brush. A short-haired roller is recommended (microfibre 8 mm). For spray application, contact Ciranova® technical service. Apply the 1st coat in the direction of the wood grain. After 4 to 6 hours, apply a 2nd coat in the same way as the 1st coat. Allow to dry for 12 to 24 hours and then intermediate sanding with 180-220 grain sandpaper before applying the 3rd coat.
OPTIONAL: a HARDER PLUS (10%) can be added to increase the chemical and mechanical resistance.
Finish: The PLUS RANGE is used as primer and finishing coat.